INTERXDBTHE NEXT SOFTWARE Book a Demo

Compatible IoT Hardware

The Devices Behind the Data

InterXDB integrates with a range of WiFi and WiFi-enabled devices — smart breakers, water meters, energy monitors, and gateways — giving you full control from a single dashboard.

⚡
Breaker

WiFi Smart Breaker — Single Pole

DIN-rail mounted single-pole circuit breaker with WiFi wireless control. Remote ON/OFF via InterXDB dashboard. Reports live current and power draw.

  • Protocol: WiFi 3.0
  • Rating: 1P / 16A–63A
  • Metering: Voltage, current, kWh
  • Mount: DIN rail (35mm)
  • Works with: SmartBuild EMS
⚡
Breaker

WiFi Smart Breaker — 3-Phase

Three-phase DIN-rail breaker for commercial and industrial installations. Full 3-phase monitoring with per-phase current readings and remote trip control.

  • Protocol: WiFi 3.0
  • Rating: 3P / 32A–100A
  • Metering: Per-phase voltage, current, kWh
  • Mount: DIN rail (35mm)
  • Works with: SmartBuild EMS
📡
WiFi Breaker

WiFi Smart Breaker — Single Pole

WiFi-enabled circuit breaker for locations where WiFi mesh is not available. Connects directly to your local network — no hub required.

  • Protocol: WiFi 2.4GHz
  • Rating: 1P / 16A–40A
  • Metering: Voltage, current, power (W), kWh
  • Mount: DIN rail (35mm)
  • Works with: SmartBuild EMS
📡
WiFi Breaker

WiFi Smart Breaker — 3-Phase

Industrial-grade 3-phase WiFi breaker with built-in energy metering. Ideal for large commercial loads with direct network integration.

  • Protocol: WiFi 2.4GHz
  • Rating: 3P / 32A–63A
  • Metering: Per-phase kWh, power factor
  • Mount: DIN rail (35mm)
  • Works with: SmartBuild EMS
💧
Water

WiFi Water Valve Controller

Motorised ball valve with WiFi wireless control. Remote open/close from the InterXDB dashboard. Ideal for tenant sub-meter isolation and leak response.

  • Protocol: WiFi 3.0
  • Pipe Size: DN15 / DN20 / DN25
  • Actuator: Motorised ball valve
  • Position Feedback: Yes (open/closed confirmation)
  • Works with: SmartBuild EMS, LandlordApp
📈
Water

Pulse-Output Water Meter

Standard residential/commercial pulse-output water meter. Each pulse = 1 litre. Pairs with a WiFi pulse counter for wireless reporting to InterXDB.

  • Output: Pulse (1 pulse/litre)
  • Pipe Size: DN15 / DN20
  • Flow Range: 0.03 – 3 m³/h
  • Interface: Reed switch / dry contact
  • Works with: SmartBuild EMS, LandlordApp
💧
Water

WiFi Pulse Counter Module

Converts dry-contact pulse signals from any standard water meter into WiFi wireless readings. DIN-rail mountable alongside existing meters.

  • Protocol: WiFi 3.0
  • Inputs: 2x dry contact pulse inputs
  • Power: 12–24V DC or battery
  • Mount: DIN rail / surface
  • Works with: SmartBuild EMS, LandlordApp
🔌
Energy Monitor

WiFi Clamp Energy Monitor — Single Phase

Non-invasive CT clamp energy monitor. Clips onto any live wire — no rewiring required. Reports live watts and cumulative kWh wirelessly to SmartBuild.

  • Protocol: WiFi 3.0
  • CT Input: 100A split-core clamp (included)
  • Reporting: Live W, cumulative kWh
  • Power: USB / 5V adapter
  • Works with: SmartBuild EMS
🔌
Energy Monitor

WiFi Clamp Energy Monitor — 3-Phase

Three-channel CT clamp monitor for 3-phase commercial installations. Monitors each phase independently. No interruption to supply during installation.

  • Protocol: WiFi 3.0
  • CT Inputs: 3x 100A clamps (included)
  • Reporting: Per-phase W, kWh, voltage, PF
  • Power: 12V DC adapter
  • Works with: SmartBuild EMS
📶
Gateway

WiFi Network Coordinator

Compact WiFi coordinator that connects all smart devices to the SmartBuild system. Supports 100+ devices per unit with no additional hub hardware required.

  • Protocol: WiFi 3.0
  • Range: Up to 20m direct / 100m+ with mesh
  • Devices: 100+ per coordinator
  • Works with: SmartBuild EMS
🌐
Gateway

WiFi Mesh Range Extender

Extends WiFi mesh coverage to distant areas of a building — sub-boards, basements, and remote plant rooms. Self-configuring; automatically joins the existing network.

  • Protocol: WiFi 3.0
  • Range Extension: +20–30m per node
  • Config: Zero — auto-joins existing mesh
  • Works with: SmartBuild EMS
⚠

Not sure which hardware fits your building?

Our team will assess your existing metering infrastructure and recommend the right combination of devices for your site — at no cost. Most commercial buildings are fully instrumented within half a day.

Book a Site Assessment